3" Aluminum Rear Lower Block Lowering Blocks Kit with 10" "U" Bolts Nuts Washers

Description

3" Aluminum Rear Lower Block Lowering Blocks Kit with 10" "U" Bolts Nuts Washers
Sway-A-Way 3 inch Square Lowering Blocks Kit
THIS LISTING IS FOR ONE (1) SAW-3S-BLOCK-KIT
Description:
Sway-A-Way 3" aluminum lowering block kit. Will Fit Most Mini-Trucks, Pick-Ups, Vans, & Cars with Leaf Springs that have a 3" Diameter Axle Tube.
CHECK YOUR VEHICLE BEFORE PURCHASING. CHECK AXLE SIZE AND "U" BOLT LENGTH NEEDED TO MAKE SURE THESE WILL FIT.
WILL NOT FIT FULL SIZE TRUCKS
NOT FOR USE ON TRAILERS WITH SHORT ARC LEAFS SPRINGS
Axle Spring Perch Must Be at least 2-3/16" wide and 4-7/8" Long
Vehicle Must Have Leaf Springs that are at Least 2" Wide
NOT Recommended for Dodge Dakota
For Lowering Vehicles Frame & Body, Depending on Factory Leaf Spring Design (See Below)
Decrease Wheel Clearance for Looks & Handling
Aluminum Blocks Measure 3" Tall by 2-3/16" Wide by 4-7/8" Long
Blocks will not take harsh off road abuse, designed for street lowering applications.
** Note** 1997-2000 Chevy S-10 Truck & S-10 Blazer - Sway-A-Way recommends using a block plate to prevent failure of the block.
Specifications:
Condition: NEW
Manufacture: Sway-A-Way
Drop: 3"
Includes:
4 - 1/2" diameter by 3" wide (inside) by 10" long ROUND "U" bolts
8 - Grade 8 High Hex Deep Nuts (5/8" deep)
8 - Through-Hardened Large Steel Washers
1 - Installation Instructions
Applications:
Universal - 3" Axle - 2" Wide Leaf Springs
Part# - SAW-3S-BLOCK-KIT
Powered by SixBit's eCommerce Solution